tag:blogger.com,1999:blog-75655120142741455952024-02-20T21:17:15.575+11:00Building a HTPCThis blog will chronicle my journey to create a Home Theater Personal Computer from easily available computer parts.
I'm no computer expert, so I'm expecting that my experiences can benefit everyone who wants to build a machine that can do heaps more than an off-the-shelf product and can be easily upgraded as your needs change.
By the way, I don't want to make any compromises. I'm aiming to make this the same or better, in all respects, than anything that can be bought off-the-shelf.Unknownnoreply@blogger.comBlogger34125tag:blogger.com,1999:blog-7565512014274145595.post-13578350175838966812010-07-18T20:10:00.000+10:002010-07-18T20:10:36.880+10:00Massive increase in picture qualityI've always been a bit dissatisfied with the quality of the video that came from the HTPC - for some reason, I could never get the blacks really black. Its as if the gamma setting was still turned up. I've spent a couple of hours over the last few months playing with brightness, etc - trying to get it right.<br />
<br />
Even when using the calibration videos in Media Center, I could get the pic to about 8/10 - not the expected 10/10 that I was aiming for (remember... no compromises!).<br />
<br />
I played around some more with the graphic card driver and discovered a setting to change the pixel type from YCBCr to RGB. The jump in picture quality is incredible.<br />
<br />
I did some research into why - and discovered this pretty technical link http://www.audioholics.com/tweaks/calibrate-your-system/hdmi-black-levels-xvycc-rgb<br />
<br />
Now, I don't profess to really understand much of this... but I do know that now I can get the "blacker than black", which seems to be 0 on a scale of 0 - 255... whereas before, it seems the lowest I could get was 16 out of 255.<br />
<br />
So I'm pretty pleased with the picture now... it equals the picture coming from the tuner.<br />
<br />
And another discovery. If you're in Australia, you'll know that 7 and 9 have a High Definition version of the standard definition channels. Picture quality wise - they are pretty much identical.<br />
<br />
In the morning, I usually watch the Sunrise morning program while getting ready for work. The text down the bottom of the screen always had blotchy stains underneath the rendering:<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;"></div><div class="separator" style="clear: both; text-align: center;"><a href="http://www.newscaststudio.com/blog/wp-content/uploads/2010/02/screen-shot-2010-02-07-at-24301-pm.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="222" src="http://www.newscaststudio.com/blog/wp-content/uploads/2010/02/screen-shot-2010-02-07-at-24301-pm.png" width="400" /></a></div><br />
The HD versions of the channels, in conjunction with the RGB, rather than YCbCr - completely eliminates these blotches and ghosts. I don't know why SD has them... its rather like analogue ghosting... which just shouldnt happen in digital.<br />
<br />
anyway... they're gone now. Reprogrammed the "7" channel to point to 70 (7 HD) and the "9" to point to 90. Cool.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-51800710156326858382010-06-14T15:58:00.003+10:002010-07-18T19:58:11.062+10:00Black screen when skipping back with live TVI've been finding that skipping backwards during live TV using the skip back button often resulted in the screen going black for a few seconds and reverting to around the live time. Would get a couple of skips in and then the problem would occur. <br />
<br />
A quick google showed that I wasn't the only one.<br />
<br />
A few registry entries from http://thegreenbutton.com/forums/p/88321/452112.aspx seem to have solved it:<br />
<br />
Simply delete these 2 reg keys and reboot to fix the issue:<br />
<b>[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Extensibility\Entry Points\{7e7a8710-9e4a-40a3-824a-7b0baf38abcf}]</b><br />
<br />
<b> </b><b>[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Extensibility\Applications\{a0cd8951-e5b6-4662-9c9c-d56c5b38ca59}]</b><br />
<br />
<br />
With luck, it will solve the occasional problem when coming out of S3, where the screen stays black but audio is working ok. Strange.<br />
<br />
Backed up the keys, just in case I need to add them back in.<br />
<br />
I've an inkling that this started when I fatefully upgraded my ATI Catalyst Control Center for no particular reason. Just goes to show that once you've got a stable system, best to update software with caution. In general, I won't be auto-upgrading anything automatically - even Windows.Unknownnoreply@blogger.com1tag:blogger.com,1999:blog-7565512014274145595.post-3586949886416753072010-05-30T15:16:00.001+10:002010-05-30T15:18:13.775+10:00Some lessons learned from experience...I've removed the Compro single tuner and put in a Leadtek DTV2000DS twin DVB-T tuner.<br />
<br />
I was finding that with the wife's "Masterchef" show on 6 nights a week, often for over an hour, that it was common for me to clash with it. Problem solved instantly with a dual tuner that allows watching something and recording something else, or recording two things and watching a third with the TV tuner.<br />
<br />
The remote control that came with it is rubbish though... unfortunately I'm being forced to use it short term (see later this post).<br />
<br />
I'll save the Compro for something else later on.<br />
<br />
Also, I'm glad I didn't plaster in the wires running from the HTPC to the TV, as I would have not been able to accommodate the wire for the center speaker, nor the remote control receiver that now conveniently sits lodged between the speaker and the TV. The conduit gives the flexibility to crack it open and add wires as needed. The best of both worlds would be to have a hollow wall, but that wall is brick... so no can do.<br />
<br />
I was prepared to plaster in the front speaker wires however, since can't conceive of having to put extra wires to the speakers. Once again, the Sonicrafter scoured a groove in, without creating clouds of dust that an angle grinder does.<br />
<br />
The rear speakers are on a hollow wall, so it was a simple matter of cutting a hole the size of a milk bottle cap at the top and bottom, getting a lead sinker tied to finishing line, dropping it through and hoping there wasnt a noggin in the way. Once the sinker was grasped at the other end, tie on the speaker cable and gently pull it through. One of the speaker wires is slightly visible from a certain angle, because there was a noggin there, but its not really noticeable, so I can live with it.<br />
<br />
The rear speakers are mounted in the corner of the room and angled out slightly, using of all things, door stops screwed into the wall to give the speakers a good angle... works well!<br />
<br />
<br />
Have a look at the Dolby site http://www.dolby.com/consumer/setup/speaker-setup-guide/select-config-5-1.html for correct layout.<br />
<br />
The remote control that I had also has blown up. I think it might have been a little toddler who switched off the HTPC while it was in S3. And then maybe flicked the switch on, off, on, off, etc - I don't know, I wasnt there. But in any case, it looks as though the receiver, rather than the remote, has blown something. Its little red light doesnt come on anymore and the HTPC doesnt generate a USB interrupt when plugging it in (not sure that it used to before, but generally most USB things do... don't they?). All the USB ports seem to work with the wireless dongle, so the receiver is my best guess about whats gone wrong.<br />
<br />
I've since learned that nobody in suburbia sells MCE remote controls - so I ordered one that I was originally going to get but couldnt find. This one http://www.pcworld.idg.com.au/review/home_entertainment/rock/remote_control_for_windows_vista_rm-vr1/221206<br />
<br />
If it turns out that the remote wasnt broken and something else is wrong, I'll be unimpressed.<br />
<br />
Something else I've learned is that ATI Catalyst Control Center (CCC) which gives you access to all of the fancy settings like brightness, colour and gamma on the GPU *IS NOT* backwards compatible with the drivers. I discovered this by downloading a new version of CCC, upgrading it, but not upgrading the associated graphics driver. I discovered that all of the changes to settings would revert back to defaults immediately - effectively preventing me from tuning the colours. Drove me crazy for a couple of days before I worked it out.<br />
<br />
I've taken the drastic step of not allowing anything to upgrade automatically except antivirus. Yes, even Windows... as I'm tiring of their weekly Windows Defender updates. With luck, there will be no more software to go onto this machine.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-71669992748049265502010-05-06T09:06:00.000+10:002010-05-06T09:06:46.622+10:00Avatar - the ultimate Blu-ray challengeI've been hearing that the Avatar Blu-ray has already gained a reputation for being unplayable on many HTPCs and even commercial BD players - as the Avatar BD uses a new type of copy protection that may need a software/firmware update.<br />
<br />
Too bad if you've got a player that can't update firmware. <br />
<br />
I couldnt resist the challenge and hate the idea that my beloved HTPC couldn't play something... I need to know! So I bought the disk from JBHiFi for $24.95.<br />
<br />
Anyway - happy to report that it played flawlessly. Surround sound and all. Heh - I should have rented it!<br />
<br />
The previous software update from Cyberlink was around 6 weeks back or so - so maybe that was the Avatar patch.Unknownnoreply@blogger.com2tag:blogger.com,1999:blog-7565512014274145595.post-13513769166597731112010-04-21T19:12:00.000+10:002010-04-21T19:12:40.334+10:00Quick optimisation that I discovered...<br />
<br />
If a DVD is left in the drive, I was finding that occassionally the HTPC wouldnt come out of sleep properly - the CPU and fan would start up, but the screen would remain black. This would happen maybe 1 time in 10.<br />
<br />
I changed a couple of things - firstly, the DVD drive was set as the first boot device... I changed this to the third device. Secondly, I turned on Quick Boot in the BIOS.<br />
<br />
Quick Boot for some reason skips some of the POST, so there is no beep.<br />
<br />
To be honest, I'm not sure which one solved the problem - I think it was probably setting the DVD to not be the first boot device... but it hasnt black screened on me since, and that was two weeks ago I made the change.<br />
<br />
At some stage I'll turn quick boot off again and see - but the HTPC rarely ever gets completely shut down, so there is not very often I would hear the POST beep.<br />
<br />
Useful tip in case other people are having the same problem.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-87793128947095119802010-04-14T21:24:00.000+10:002010-04-14T21:24:28.166+10:00Surround sound on the cheapI'll get back to my blabbing about sound formats like "DTS", "Prologic decoders" and "Lossless Bitstreaming" a bit later on.<br />
<br />
But for now, a couple of things have happened.<br />
<br />
Firstly, I'll not be buying any of the current crop of AV Receivers, my reasoning is that HDMI 1.4 is going to become common and the socket is different.<br />
<br />
Although I'm not really all that excited by 3D television, it would seem a bit short sighted to buy something that only does 1.3 when replacing my 1.3 graphics card with a 1.4 will cost maybe $60 once 1.4 becomes widespread.<br />
<br />
I'd want to avoid being 1.4 in the HTPC, 1.3 in the receiver and 1.4 on the TV... why set yourself up for compatibility problems if you can avoid it by waiting a bit?<br />
<br />
Anyway - I looked into using the s/pdif output, but the cheapest 5.1 surround sound speakers that do this sort of digital input are the famous Logitech Z-5500 - but even then they are still in excess of $400. Secondly I checked to make sure that PowerDVD8 supports "lossless bitstreaming" - a fancy way of saying Dolby TrueHD and the DTS Master formats - and no, it doesnt - I'd need to upgrade to PowerDVD10 - according to one person in Cyberlink... however, this site says it does. <a href="http://www.power-dvd.biz/comparison.html">http://www.power-dvd.biz/comparison.html</a><br />
<br />
Now there is a better than even chance that Cyberlink just wants me to upgrade, but its sort of strange.<br />
<br />
I also suspect that with anything less than multi-thousand dollar speakers, the difference between going lossless digital and plain old analogue will be undetectable.<br />
<br />
Anyways... to cut a long story short, today I bought some cheapish Logitech X-540 5.1 speakers from Dicks Smith (negotiated down to A$98). I've gotta say, that so far I'm pretty impressed.<br />
<br />
OK - they are not studio quality, but its a giant leap forward from using the television speakers. Watched a bit of Collateral Damage with the volume at 50% and the sound of explosions and bullets wizzing past was pretty engaging.<br />
<br />
<a href="http://www.amazon.com/Logitech-X-540-Speaker-System-Black/dp/B000JJM8XE/ref=sr_1_3?ie=UTF8&s=electronics&qid=1271243955&sr=1-3">http://www.amazon.com/Logitech-X-540-Speaker-System-Black/dp/B000JJM8XE/ref=sr_1_3?ie=UTF8&s=electronics&qid=1271243955&sr=1-3</a><br />
<br />
Choice Magazine has also reviewed them and said they were good value as well.<br />
<br />
I can certainly recommend them as a way to add surround sound for under a hundred dollars.Unknownnoreply@blogger.com1tag:blogger.com,1999:blog-7565512014274145595.post-89186719072298311952010-04-10T22:20:00.000+10:002010-04-10T22:20:56.582+10:00Dolby formats I'm gonna blabber on about audio a bit more, because its interesting. Note that I'm learning too, so there is no guarantee that what I'm saying is right. If I'm wrong, refer to <a href="http://www.practical-home-theater-guide.com/">http://www.practical-home-theater-guide.com/</a> for what seems to be an excellent introduction and where most of this comes from. <br />
Then come and correct me.<br />
<br />
How its encoded is everything - there are two families that compete with each other: Dolby and Digital Theater Sound (DTS).<br />
<br />
Of course, these are both surround sound formats, meaning that each speaker has its own separate audio track that is entirely independent of the others - even though the analogue Dolby Surround achieves this by a slieght of hand.<br />
<br />
Dolby - Dolby is not just Dolby. It can be<br />
<br />
<ul><li>Dolby Surround - An analogue 2 audio channels on the media that can be decoded by a Dolby Surround device (aka as a "Pro Logic decoder") to 4 audio channels. Used on TV and VHS and even used today in Cinemas in case the Digital sound fails. More about Pro-logic decoders later. Consumer release in 1982.</li>
</ul><br />
<ul><li> Dolby Digital (aka Dolby AC-3) - A digital - up to 5.1 channels used in DVDs, HDTV, games, etc. All 6 sound channels are independent of one another. Dolby Digital may also be implemented as 2.0 channels. The 0.1 channel is for low frequencies only and is less bandwidth than the other 5. Introduced in 1995.</li>
</ul> <br />
<ul><li>Dolby Digital Live - Something that converts any multichannel audio to Dolby Digital for playback. Found in gaming consoles, etc. Transmission is through S/PDIF.</li>
</ul><br />
<ul><li>Dolby Digital Ex - like Dolby Digital, but the 6th channel is full spectrum. Very rare format.</li>
</ul><br />
<ul><li>Dolby Digital Surround Ex - like Dolby Digital, but for use in cinemas and is 6.1 channels.</li>
</ul><br />
<ul><li> Dolby TrueHD - the first of the High Definition Digital formats - so called because the maximum bit rate of the signal has been increased from 640 Kbits/sec to 18 Megabits per second and increasing the number of audio channels to 7.1 It is bit-for-bit identical to the studio master copy. Used in Blu-ray and the now defunct HD DVD - fully supported by the HDMI standard. First consumer release in 2006.</li>
</ul><br />
<ul><li>Dolby Digital Plus - Very similar to Dolby TrueHD, but up to 6 Mbps and only up to 1.7 Mbps on Blu-ray. Fully supported by HDMI standard - in fact, it must be used. To transmit over S/PDIF means further transcoding. Can't find when it was first released, but its probably goes hand-in-hand with Blu-ray release - so say 2006.</li>
</ul><br />
Next blog - all about DTS.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-47940562728476100122010-04-07T22:02:00.000+10:002010-04-07T22:02:15.725+10:00The Question of AudioWe'll having just thought to myself that playing through the TV speakers would be ok... just out of interest, I did a bit of research on the question of how to get some kind of audio system hooked up.<br />
<br />
Well.... things have changed a bit in the last, um 15 years since I last bought a decent stereo system. Back in my heyday, an amp had maybe 10 inputs at the back, mostly RCA plugs carrying analogue signals... nowadays, an amp seems to have been renamed as a "Receiver" and has maybe 40 plugs on the back!<br />
<br />
Frankly, its a bit of a shock - Video is a piece of cake compared to the jargon around audio systems. <br />
<br />
The Radeon graphics card supports:<br />
" Output protected high bit rate 7.1 channel surround sound over HDMI with no additional cables required <br />
Supports AC-3, AAC, Dolby TrueHD and DTS Master Audio formats"<br />
<br />
Sounds impressive!<br />
<br />
The motherboard supports:<br />
"Realtek ALC888B codec <br />
<br />
High Definition Audio <br />
2/4/5.1/7.1-channel <br />
Support for S/PDIF In/Out"<br />
<br />
From what I gather, an AV Receiver is sort of like a hub where the HTPC or Blu-ray sends its output which then distributes it to speakers and the TV. Unfortunately, there are more caveats than you can poke a stick at, but it seems to boil down to this: If you want something that takes HDMI that combines audio and video as input, you pay big time.<br />
<br />
The High Definition Audio seems to be output from the Mobo from the 3 analogue jacks at the back and is configured from the onboard sound drivers.<br />
<br />
S/PDIF in/out - Sony Phillips Digital Interface. These sockets are on the Mobo but don't connect to anything at the moment. I understand that mostly these are coax RCA or sometimes optical (aka 'Toslink') connectors.<br />
<br />
Frankly, I suspect that going full HDMI for audio is out of my price range at the moment, as its $300+ for the receiver and upwards of $1500 to match speakers.<br />
<br />
But the digital nature of S/PDIF interests me... maybe a receiver can be found that can be done for less than HDMI and not much more than the analogue version?<br />
<br />
An alternative is to maybe get a Home Theater in a Box (HTIB) - but somehow they're a little too "Harvey Norman" (a big consumer electrical chain) for my liking, and the ones that I've glanced at seem to just take analogue inputs. I sort of like the challenge of getting something that is all digital until the last possible moment.<br />
<br />
Then again... maybe the TV speakers are fine (for now).Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-77051916767637715072010-04-03T13:44:00.000+11:002010-04-03T13:44:43.180+11:00Happy now - even the Wife likes it!So I've hidden the wires now and its a new month, so there is more bandwidth on my cable to play with:<br />
<br />
Here is a higher res video of the finished product<br />
<br />
<object height="385" width="480"><param name="movie" value="http://www.youtube.com/v/D8tY8Lf5mPM&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/D8tY8Lf5mPM&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object><br />
<br />
<br />
This photo shows the HTPC in its final, installed location - I havent got around to rotating all my pictures yet!<br />
<br />
<div class="separator" style="clear: both; text-align: center;"><br />
</div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiEyOqsQrmS7BEKN1d2Edcj57lNElmt-fJ8t2Q0kweDPXU7mD0WicZoRBT177W_KUdAk4dUpP002Y_unp7LsyJLeCKqq6TXUd4y9xnWFpcwQzzdWTJ2bq9epbgkOkKn8FZ02w3-JyXHLAnW/s1600/IMG_1287.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="640" nt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiEyOqsQrmS7BEKN1d2Edcj57lNElmt-fJ8t2Q0kweDPXU7mD0WicZoRBT177W_KUdAk4dUpP002Y_unp7LsyJLeCKqq6TXUd4y9xnWFpcwQzzdWTJ2bq9epbgkOkKn8FZ02w3-JyXHLAnW/s640/IMG_1287.JPG" width="480" /></a></div><br />
<br />
<br />
And this one is hidden away - the remote sensor is barely visible between the second and third baby photo. With the drawer closed, all of the functions can still be operated, except for physically inserting a disk.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgZdiBatkIsn65orroKbBmj0-aDItRXKe5PylBrEKP94cNTg5sJscyImkh6dDLfHuB63DecP3A34nui3cl76stOGHmbwlpigYhmK0uHe_fcz5FvaugPopdN6cxhQkfhY9T04d01XqYdocga/s1600/IMG_1288.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="640" nt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgZdiBatkIsn65orroKbBmj0-aDItRXKe5PylBrEKP94cNTg5sJscyImkh6dDLfHuB63DecP3A34nui3cl76stOGHmbwlpigYhmK0uHe_fcz5FvaugPopdN6cxhQkfhY9T04d01XqYdocga/s640/IMG_1288.JPG" width="480" /></a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-26840615538542873432010-04-03T11:22:00.000+11:002010-04-03T11:22:43.081+11:00Remote Controls - the icing on the cakeThe little credit card remote that came with the Compro Vista T100 tuner card has either busted or the battery has gone flat... after 2 weeks.<br />
<br />
I'm not hugely upset - it was not good in the first place and it gives me the excuse to replace it.<br />
<br />
Now I've learned what is important in a remote control - proper buttons! The little blister button things on the Compro remote are hard to feel, so you can't tell easily when they've been pressed and the regular layout of the buttons makes it hard to use in the dark. <br />
<br />
Furthermore, it has no way to make the PC come out of sleep - since I aspire to spend the rest of my life on the lounge, this isnt good.<br />
<br />
Also, no number keypad makes channel changing tedious and I can't give music rankings from 1 to 5 without getting the keyboard.<br />
<br />
I've noted that the wireless radio mouse can wake the PC, so its obviously quite possible without having to send a signal to the PWR pins (i.e. the pins that the ON switch activates).<br />
<br />
If it were an IR mouse, I was tempted to get some kind of Logitech Harmony All-in-1 remote, that way I could program a Logitech to send a mouse click to the wireless mouse sensor.<br />
<br />
So I decided that just a plain Media Center remote would be fine, as any advantages of having one remote control for everything would be more than outweighed by having to get up to turn on the HTPC (remember... no compromises!)<br />
<br />
On Thursday, I looked at a few different remotes - it boiled down to either a Hauppauge or a Rock one - neither which was available in the CBD on Thursday.<br />
<br />
So I ended up getting a cheap Ace Media Center certified remote for $35. It does everything that I need and later on when the kids won't smash a Logitech all-in-one, I can upgrade to one remote that does it all.<br />
<br />
Most importantly though - it activates the on/off switch on the HTPC without any problems at all.<br />
<br />
Its opened up an interesting idea for keeping costs down: Now that the remote sensor can be discretely hidden, there is actually no reason particularly to make the HTPC visible at all. It can be completely hidden from view. Since the case was slightly over $200 and was the most expensive part by far, those on a budget might be able to consider hiding an unsightly case in a drawer or behind the entertainment unit -as long as there was acceptable access for actually inserting a DVD and for cooling, it would be a good way to majorly reduce the cost.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-34522664051848389652010-03-30T13:39:00.001+11:002010-03-30T16:43:47.194+11:00Freeview?So if I go to the next door Harvey Norman and see a sleek new media player that says its "FreeView Compliant!" thats got to be a good thing... right?<br />
<br />
I remember seeing those freeview ads on TV and wondering what the bottom line was - why bother advertising some extra channels? Seemed a bit strange to me - surely channel 7 could advertise 7-2 and ABC could advertise ABC-2 and 3 on their own... why bother getting together to make a vague and expensive ad for something called "FreeView" which just seemed to be a few extra channels?<br />
<br />
Maybe they're just advertising digital TV? Read the FreeView website, and thats what they seem to be doing.<br />
<br />
Turns out, that there is something they're not telling you... <br />
<br />
Here is the lowdown on what Freeview seems to be, drawn mainly from these websites:<br />
<br />
<a href="http://www.pcauthority.com.au/BlogEntry/142080,half-of-australias-first-freeview-devices-wont-be-freeview-compatible.aspx">http://www.pcauthority.com.au/BlogEntry/142080,half-of-australias-first-freeview-devices-wont-be-freeview-compatible.aspx</a><br />
<br />
<a href="http://www.pcauthority.com.au/BlogEntry/136503,freeview-confirms-new-aussie-epg-is-backwards-compatible-coz-its-nothing-but-a-skin.aspx">http://www.pcauthority.com.au/BlogEntry/136503,freeview-confirms-new-aussie-epg-is-backwards-compatible-coz-its-nothing-but-a-skin.aspx</a><br />
<br />
<a href="http://en.wikipedia.org/wiki/Freeview_(Australia">http://en.wikipedia.org/wiki/Freeview_(Australia</a>)<br />
<br />
<br />
The bottom line seems to be a FreeView compliant device <strong>will force you to watch the ads on recorded FTA (Free to air) television</strong> - you might be able to fast forward them at a limited speed, but not do the fantastic 30 second skip that conveniently skips one advertisement.<br />
<br />
In return for this, down the track a bit you might get an enhanced Electronic Programme Guide (EPG) that looks a bit nicer, but contains the same information. Woop de do.<br />
<br />
I couldnt find any reference to these restrictions on the Freeview website:<br />
<a href="http://freeview.com.au/faq/">http://freeview.com.au/faq/</a> ... if they're there, then they are well hidden.<br />
<br />
I had a brief 1/2 second of concern that they might do something nasty encrypt the EPG so that only FreeView compliant devices could read it (Blu-ray anyone?), but apparently the enhanced EPG might be encrypted, but there are no plans to take away the non-Freeview one.<br />
<br />
Any anyway... even if they did, there are alternative places that a HTPC can get its EPG from - such as IceTV. Its not free, but hey, how much is skipping ads worth? A lot I reckon - a 60 minute program can be watched in 45 minutes, I can use that 15 minute saving for something else. Summed over a year, thats many hours.<br />
<br />
The IceTV site had the most succinct definition of FreeView that I've see so far:<br />
<a href="http://www.icetv.com.au/about/freeview.shtml">http://www.icetv.com.au/about/freeview.shtml</a><br />
<br />
<em>"Some Personal Video Recorders (PVR's or DVR's) available in the market today come with so called 'Freeview certification'. These devices have been modified and in most cases <strong>features that benefit the user have been removed</strong> to meet the requirements of Freeview and the interests of the TV Networks. Features commonly removed or restricted are greater fast forward speeds (60x or more) and the 'ad skip' button."</em><br />
<br />
<br />
Interesting, huh? No wonder the TV networks aren't telling you the whole story.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-34757496787932267612010-03-29T19:43:00.001+11:002010-03-29T20:08:45.797+11:00Scheduled recording and S3I should add - now that I've got the tuner in tip top working order I tested a scheduled recording. Happy to say that it all goes without a hitch. The HTPC wakes from S3 state (see <a href="http://en.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface">http://en.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface</a>) a few minutes before the show is scheduled, makes the recording and then shuts down gracefully.<br />
<br />
A click on the mouse, keyboard or case power button will wake it instantly. A drawback with the video card I have is that it has no connection to the power button on the PC (some of the slightly more expensive ones do have it), so the remote can't wake the PC - one day I'll change the card so that it does this. Its something that I'd look for if I knew at the time (that, and a full numbered keypad on the remote!).<br />
<br />
For an old XP person like me, this is nearly a bloody miracle - although XP can do S3 if your hardware supports it, making it work and wake up is not easy. <br />
<br />
It seems that S3 is integrated into Windows 7 so that you can make much more use of it.<br />
<br />
I've learned a little but about that thing called "Freeview" and now know why I don't want it. I'll tell you about it later on.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-41460848792813501322010-03-29T19:29:00.002+11:002010-03-29T19:44:40.110+11:00DVD Artwork and SynposisA few other things of interest:<br />
<br />
When ripping a DVD using DVDShrink, it goes into the movies library no worries, but there is no artwork or synopsis included (i.e. like if you rip a CD, all of that magically appears).<br />
<br />
Get the DVD ones from DVDxml.com - ignore all of the gumph about having to download some Windows client... not sure what it does and the password that thought I needed to use didnt work anyway.<br />
<br />
You don't need to install anything.<br />
<br />
Just become a member (its free), login and search for the movie - once you've found it, click the "Download XML" button that looks greyed out.<br />
<br />
Get that little XML file and put it into the subdirectory where your movie is and Media Centre will pick up the artwork, synopsis, reviews and even similar movies. Not sure where from, but who cares?<br />
<br />
4/5 ths of the XML files work, the remainder still draw a blank - not sure why, I figure that the servers that the artwork comes from are probably not 100%.<br />
<br />
If you've got hundreds of movies, then I'm sure there's a way to automatically get the XMLs, but this way will do me fine, since the movies that I keep have been purchased, there are not that many of them.<br />
<br />
Having said that, I have got a few that are not G rated. I'll need to find some way to prevent my 5 year old from viewing them.<br />
<br />
BTW - I've taken all the ads of this blog. No-one was clicking on them anyway :-)Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-81110981892559092172010-03-27T17:43:00.001+11:002010-03-29T19:51:21.046+11:00Tuner card not tuning? A new antenna will probably fix it.Antenna installer from Beverly Hills franchise of Jim's Antennas came around today and installed a brand new shiny Hills Antenna SMX024WB, which basically looks like this:<br />
<br />
<div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiI5N3GouPkqbxTyEBevZ4q8QxpJhZcAJAySO-Xx5wqUS5bdAmy4W6dElUDGmVvpb_jbrKzyH0ODUvaCULS9Ls8lq2dh21C2n5Rh0Ny7I8hYbWzNVo1AW8hqo1t_Iao4IKT1RbAeqU-hQdv/s1600/enlarged.jpg" imageanchor="1" style="clear: left; cssfloat: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="212" nt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiI5N3GouPkqbxTyEBevZ4q8QxpJhZcAJAySO-Xx5wqUS5bdAmy4W6dElUDGmVvpb_jbrKzyH0ODUvaCULS9Ls8lq2dh21C2n5Rh0Ny7I8hYbWzNVo1AW8hqo1t_Iao4IKT1RbAeqU-hQdv/s400/enlarged.jpg" width="400" /></a></div><br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Got a lot of good advice from <a href="http://www.dtvforum.info/">http://www.dtvforum.info/</a>, so I knew what I was looking for. It doesnt have the 3 metre rods at the back like most antennas - their for bands 1 and 2, which carry channels 5 and under (I think) in VHF. Since the digital signal doesnt work on that wavelength, it just causes noise and breaks up the signal. Something we're having a lot of trouble with.<br />
<br />
So we got a new antenna, new quad shielded cabling, F-connectors, etc - and the result is startling!<br />
<br />
For the technically minded, the signal at the downstairs outlet is 70 dB, which apparently is a very good signal.<br />
<br />
Instead of 5 or 6 channels main channels, with NITV and Expo, etc hardly ever available, we've managed to pick up nearly 40 channels! Some I hadnt even heard of! Must be picking up regional Wollongong and Newcastle.<br />
<br />
Ok - lots of the channels are the other broadcasts of the normal channels, but still... its a huge change.<br />
<br />
But most importantly, the HTPC is picking up the signal for all channels. So thats a fantastic outcome and well worth the $495 for the antenna and installation. No more drop outs for us.<br />
<br />
I can completely recommend Bill from Beverly Hills Jim's Antennas as someone who does a thorough job at a fair price and shows up on time.<br />
<br />
I got the antenna guy to divide the cable into two downstairs and fed one directly into the TV and the other into the HTPC tuner - that way we can use the TV tuner still for ordinary TV, rather than having to route everything through the HTPC HDMI connection.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-76619338928149574782010-03-26T08:50:00.001+11:002010-03-29T19:52:02.390+11:00Blowing away 'smoke' from the tunerI got a helpful tip off <a href="http://www.dtvforum.info/">http://www.dtvforum.info/</a> that the washed out colours on the video from the tuner card has nothing to do with the card itself and everything to do with the codecs and gamma settings on the video card.<br />
<br />
I'd installed the video drivers with just the default settings and hadnt had any reason to adjust them, since the picture on everything except TV was fine.<br />
<br />
Went hunting through the settings, found the gamma setting (whatever that is) and unticked Auto - instantly the blacks became black again rather than grey and the smokey haze that seemed to permeate the video dissappeared like magic.<br />
<br />
Cool.<br />
<br />
Also, since its not the tuner card, I unwrapped the remote control that came with it and plugged it in. Naturally it didnt work. Rebooted and still didnt work. Checked the driver and set it to the right remote type. Still didnt work. Reinstalled the software again and this time it worked.<br />
<br />
Goes to show - it pays to be persistent.<br />
<br />
Antenna guy is coming around on Saturday to do the antenna. I'll test out the waking and going to sleep when the recording timer is set. <br />
<br />
I need it to wake from S3 sleep to record and then put itself back to sleep again when its finished. This has a reputation for being a bit tricky.Unknownnoreply@blogger.com3tag:blogger.com,1999:blog-7565512014274145595.post-67048286019564918792010-03-20T22:07:00.002+11:002010-03-20T22:13:11.901+11:00Basically finished!Here we go - sorry about the quality of the video, we dont have a camcorder and the camera that is recording this needed to be switched to low res, otherwise it generates HUGE files, hundreds of megabytes in size.<br />
<br />
<object height="385" width="480"><param name="movie" value="http://www.youtube.com/v/RWM0Bi8KiSQ&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/RWM0Bi8KiSQ&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object><br />
<br />
Here are some higher res photos of what it looks like on the screen - click on them to see close up.<br />
<br />
<div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiNlYG1j4COhvzt6fiJGw_5FP6grxENipgf0-l9KsOVKvUhvB34oBiCGzdHzsptymNdHBbf0przA4wJfN6DzImrYw0qrUaSNZhT2hK78Rd3w_-2YbWumDdcyTHvDj9Hl9-uTS664ROaZysU/s1600-h/IMG_1232.JPG" imageanchor="1" style="clear: left; cssfloat: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiNlYG1j4COhvzt6fiJGw_5FP6grxENipgf0-l9KsOVKvUhvB34oBiCGzdHzsptymNdHBbf0przA4wJfN6DzImrYw0qrUaSNZhT2hK78Rd3w_-2YbWumDdcyTHvDj9Hl9-uTS664ROaZysU/s640/IMG_1232.JPG" vt="true" width="640" /></a></div><br />
<br />
<div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhEXSIY6tLpFiuO57UlTKxiQv8iSCNm9NGG6iWa-vvLgPFnht3mDxwNcWNqtkaCfXZ0KtQ5YRUAjAyNRactpnFmpLJDWux7EI0yj8QitytDsfGeWWCrFhcFPTels0oLQVEDdqn5XXGvFgvL/s1600-h/IMG_1234.JPG" imageanchor="1" style="clear: left; cssfloat: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhEXSIY6tLpFiuO57UlTKxiQv8iSCNm9NGG6iWa-vvLgPFnht3mDxwNcWNqtkaCfXZ0KtQ5YRUAjAyNRactpnFmpLJDWux7EI0yj8QitytDsfGeWWCrFhcFPTels0oLQVEDdqn5XXGvFgvL/s640/IMG_1234.JPG" vt="true" width="640" /></a></div><br />
<br />
<div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiycpdpfQbtx3q3oGB_xN2gAp4oiJ2X6-LKZ5I7FUEFGmlzL0kMX77nsAD3TQ-8oFDgtV9VdyNilUP43vt0-v3xpagY7ciyQBc62_Y1x08-om8vgdCYMyJ8L8HTgBylF45fVuGY5WOPyGlT/s1600-h/IMG_1237.JPG" imageanchor="1" style="clear: left; cssfloat: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiycpdpfQbtx3q3oGB_xN2gAp4oiJ2X6-LKZ5I7FUEFGmlzL0kMX77nsAD3TQ-8oFDgtV9VdyNilUP43vt0-v3xpagY7ciyQBc62_Y1x08-om8vgdCYMyJ8L8HTgBylF45fVuGY5WOPyGlT/s640/IMG_1237.JPG" vt="true" width="640" /></a></div>Nice huh? <br />
<br />
I have to admit that the Compro tuner card picture is a bit washed out, so given that its bracket is the wrong size anyway, I think I'll sell it off and try another brand. Anyone got recommendations? I thought maybe Leadtek... that Scandinavian sounding brand starting with an H is kind of expensive.<br />
<br />
At the moment, I'm controlling it all with a wireless keyboard and mouse, but I can set up Media Center to autostart, and set the whole PC up so that it only ever sleeps in S3, not shuts down completely - so controlling day-to-day stuff with a remote should be sweet.<br />
<br />
Might even get the WAF score up to 9!<br />
<br />
Antenna guy came today. Will probably go with Jim's Antennas from Beverly Hills. The person from Nu-life was an hour late, despite giving an initial window of from 8 - 12... then gave a cock-n-bull story about walking around on the roof to get the best signal, but then the quote said he's be using the existing mast.<br />
<br />
I guess the best thing about building a HTPC is that its never really finished. I'm looking forward to toying with it for years to come.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-6193560674550142942010-03-19T21:31:00.002+11:002010-03-29T19:52:44.569+11:00Customising Media CentreJust been having a bit of fun customising Media Center<br />
<br />
http://www.theme7mc.com/<br />
<br />
Took the space theme on the second page, as I'm an astronomy nerd from birth.<br />
<br />
http://www.hack7mc.com/<br />
<br />
Looks like some interesting stuff as well. The MediaBrower plug in looks like a good way to get DVD cover art.http://www.hack7mc.com/2010/01/mediabrowser-firestorm-brings-performance-stability-and-features.htmlUnknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-87766946711398952622010-03-16T20:41:00.001+11:002010-03-16T20:42:55.067+11:00Nearly done...On the weekend I plugged in the digital tuner for the first time. The only PCI type that Octagon had was a Compro Vista T100. I took the full sized bracket off temporarily to make it fit.<br />
<br />
Unfortunately, it wont tune to channel 9 or Go. Can't say I'm all that suprised, as digital reception isnt great with our antenna - and the cable is split about 5 ways on the way down to the living room which doesnt help.<br />
<br />
So rather than keep trying tuner cards until I find one which works, we'll bite the bullet and get the antenna replaced. The guy from Jim's Antennas is coming on Saturday for a quote.<br />
<br />
Now... I'm sort of suspicious about Antenna guys. Call me mistrustful, but after dealing with TV bracket installers who seemed to be a bunch of con-artist rip off merchants, I'm sort of thinking that Antenna guys might be the same... a bunch of laid off insulation installers.<br />
<br />
Posted a bit on DTV forums to learn a little bit about what a good installer does - so hopefully I'll recognise a spiv who wants to just slap up a cheap antenna, charge me a grand and disappear, leaving me still missing channels.<br />
<br />
So this reception problem is sort of preventing me from declaring my project finished. Having said that, Dear Reader, I still havent shown you the finished product!<br />
<br />
This weekend I'll show you what it can do. Pics and maybe a Youtube video of it fully installed and running in the living room.<br />
<br />
Tell you what.... it knocks the socks off a TiVo!Unknownnoreply@blogger.com1tag:blogger.com,1999:blog-7565512014274145595.post-30203855916133007092010-03-14T17:10:00.001+11:002010-03-29T19:53:53.709+11:00More fun with Cyberlink software - Grrr!Worked it out!<br />
<br />
The Comodo security suite, one of the only firewalls I could find that was 64-bit, is incompatible with PowerDVD.<br />
<br />
Ive been imaging the drive and installing programs and testing - this time it failed.<br />
<br />
Windows help is pretty unhelpful in describing how to restore a system backup! U need to use the windows disk to do it... but it worked flawlessly in the end.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-40667075005090474822010-03-14T13:53:00.001+11:002010-03-29T19:54:49.766+11:00Fun with Cyberlink software and Blu-rayStill having hassles with Blue-ray!<br />
<br />
I'm starting to dislike this.<br />
<br />
At first it wasnt recognising any BD (Blu-ray) disks at all, and not even plain DVDs.<br />
Rolling back this time didnt fix it.<br />
<br />
Everytime I rolled back, the system got a little more polluted with debris; since I want this system pristine, this is disturbling. Eventually I couldn't roll back any further.<br />
<br />
Anyway.. nothing worked. Its always saying my display device is not HDCP compliant.<br />
Got deperate and tried AnyDVD... now this is my kind of software! Not bloated, clean interface and bypassed the HDCP without any effort at all.<br />
<br />
Trouble is, its not free and MINE SHOULD WORK!<br />
<br />
This morning I blew windows away and started again.<br />
<br />
Reinstall Windows 7.<br />
Register<br />
Get all patches<br />
Install Mobo drivers from CD<br />
Install Graphics from download.<br />
Install Cyberlink PowerDVD from CD<br />
Update PowerDVD from download<br />
Register PowerDVD<br />
<br />
No luck - darn it.<br />
<br />
As a last resort, I checked the cable at the back and there was an ever so tiny bit of give when I pushed it.<br />
<br />
Thought to myself, its nothing... but what do you know... it fixed the problem!<br />
<br />
So if there is a learning to be taken from this is this: HDMI is *not* like any other cable... my graphics and sound were perfect, but that slightly loose connection may have been behind several hours of wasted effort and a lot of angst.<br />
<br />
I lost all of my music rips and a few DVD rips that I enjoyed making yesterday and will need to do again.<br />
<br />
To guard against crapping all over my nice clean system again, I pulled out an old IDE 80 Gig HDD that I've been hoarding and used the Windows 7 System Backup feature to image the system onto the drive. Now at least I can get back to this point without spending hours and hours.<br />
<br />
Yesterday wasnt a complete deadloss... I learned that lots of my old favorite software doesnt work under 64-bit Windows. I'll tell you about it next post.Unknownnoreply@blogger.com4tag:blogger.com,1999:blog-7565512014274145595.post-65002110871806633782010-03-11T22:34:00.002+11:002010-03-29T19:55:24.597+11:00How to bypass region coding on the Blu-raySomething I discovered today - the Blu-ray region coding is much easier to defeat than on a DVD.<br />
<br />
If you've got PowerDVD, just search for a data file named BRF.dat and rename it to BRF.old (or delete it).<br />
<br />
The number of region changes on your Blu-ray just got set back to 5...<br />
<br />
I can't find any freeware decoders to allow real-time playback of out-of-region DVDs - so should I come across one, I'd need to rip it using DVD Decoder.<br />
<br />
Got a Compro T1000 tuner card and discovered that the bracket is full profile - I need low profile to go in my case. Looks like something else for ebay - not having much luck with tuner cards.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-6476354284856719882010-03-10T21:23:00.001+11:002010-03-29T19:56:09.883+11:00Hassles with Blu-ray and MSY (that cheap place to buy parts)Without describing the exact circumstances - here is the lowdown<br />
<br />
1. Don't buy anything from MSY that isn't factory sealed. Thats all I'll say about it. I'll doubt that I'll ever buy anything from them again.<br />
<br />
2. The disk that should come with the Blu-ray drive is absolutely critical to being able to play Blu-ray. If you need to buy that Cyberlink PowerDVD software, its gonna cost you around $160. Crazy. (BTW - the price in the US is US$90 - hows that for free trade?)<br />
<br />
3. Cyberlink software is notoriously bloated and soft of buggy. Of the 5 or 6 programs on the disk, I think only 3 installed successfully. Thankfully the only useful one, which played the Blu-ray was ok.<br />
<br />
4. Playing Blu-ray is a tricky business due to a nasty piece of encryption technology called HDCP (High Definition Copy Protection) - in a nutshell, all software and hardware between the disk and the television need to be certified HDCP if you want to use 1080p resolution - otherwise the disk wont play.<br />
<br />
A little utility called BD_Advisor is supposed to tell you whether your system is compliant. anyway, it says that something to do with my graphics setup isnt compliant and I should switch from HDMI to analogue. It shows ok then, but it sort of defeats the purpose of a media player if I can only watch it on my monitor upstairs.<br />
<br />
Of course, it gives you a tease first by playing you the anti-piracy notice, and then bombing out.<br />
<br />
Switching to VGA analogue onboard the motherboard works fine - likewise, using the VGA output on the graphics card. <br />
<br />
The software then downloads a 100MB patch and I upgraded the drivers on the Gigabyte graphics card, for good measure, I upgraded the sound drivers too.<br />
<br />
Now I get video via HDMI, but no sound! Arg. I rolled back the sound drivers and lo - I finally get my video and sound. At first it is really faint, but something, somewhere seems to recognise this and adjusts the volume.<br />
<br />
I'm afraid its all getting too clever for me at this point. I watch 5 minutes to celebrate my success, and then power down. The picture quality is excellent.<br />
<br />
But the saga is not over.<br />
<br />
The next morning, full of optimisim that my system software won't need to be rebuilt from scratch, I register with Microsoft my copy of Windows 7. A bunch of software updates immediately comes down the line from them and, would you believe it.... the 0110 error - non compliant with HDCP re-appears when tested my disk! You may ask why I felt it was necessary to retest at 6.45 am... well, by now I'm completely obsessed and paranoid (and justifiably so)<br />
<br />
I'm somewhat miffed by now. But its encouraging that at least my system is technically capable of playing Blu-ray and playing it well - and that this can be narrowed down to a software problem.<br />
<br />
I think about it today when in my six hours of meetings at work - and do some research at lunch on what causes this. The general consensus seems to be that make sure your drivers are up to date.<br />
<br />
I though that my graphics drivers were up to date, because I checked with DriverMax - but not the manufacturers site. Also, DriverMax only said that there was a single graphics driver.<br />
<br />
During my lunchtime research, I learned that a PCI graphics card actually can have two drivers - one for the board (Gigabyte) and one for the chipset (Radeon). <br />
<br />
First thing I did when I got home was roll back the Microsoft patches and do a system restore back to when it was working. Didnt fix it for some reason - still getting red status on BD advisor and confirmed when attempting to play the disk.<br />
<br />
I then checked the Gigabyte site for driver updates - there were none.<br />
<br />
I then checked the Radeon site for updates - I didnt know whether the version listed was earlier or later, or exactly which package I needed, but I picked what seemed to be most likely and installed it.<br />
<br />
And for the hell of it, re-patched with all MS updates and put the sound driver back on. <br />
<br />
I rebooted and ran BD advisor. Still red.<br />
<br />
On the offchance, I put the Blu-ray in and.... it started to play!<br />
<br />
Whew - despite BD advisor advising I was non-compliant, I can play BD again. For today anyway.<br />
<br />
4. My conclusion - the technology companies don't really want people playing Blu-ray on PCs, because it will accellerate the eventual cracking of their encyption keys for HDCP. This is why there is no Linux support for Blu-ray and the number of programs that can play them is limited to three - Cyberlink PowerDVD, Corel WinDVD and ARcsoft TotalMedia. I've seen questions on forums from people wanting free Blu-ray codecs similar to an ordinary video codec - well there are none.<br />
<br />
All your software and hardware from the disk to even the television must handshake with each other for it to work properly. With a dedicated player, there are only two points of failure (the player and the television) - and you can't change any of them, with a HTPC, there are at least four (the graphics hardware, the graphics software, other software on your PC, and the television) - and you can change any of them except the TV.<br />
<br />
Any of your changes might stop it working - They must be exactly right. The HDCP allows for no margin of error and something that worked yesterday might not work today - due to what seems to be an unrelated update.<br />
<br />
5. Its almost not worth the hassle. For A$200 you can get a dedicated Blu-ray player without a tuner, HDD and use that instead. Building a media player without Blu-ray has proven to be relatively easy, including Blu-ray just made it 10x more tricky and fussy. Blu-ray on a PC is really the domain of tinkerers in computers - for everyone else, I believe that one day it will just stop working and they'll have no chance of getting it going again.I don't think that it will ever be as simple as the dedicated players - not until that encyption is cracked anyway.<br />
<br />
Now - I'm just going to test it again... bye.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-17766854703931327762010-03-09T21:25:00.001+11:002010-03-09T21:30:10.860+11:00Blu Ray!Wow - its been a crazy couple of days. I don't have time to go into it right now, as I've been pretty obsessive for two days and I want to get a good nights sleep.<br />
<br />
Yesterday, my HDMI cable arrived from DealExtreme - about US$3 for something that the shops here would rip you off to the tune of $30. This means I can finally hook the beast up to my 47 inch Sony LCD.<br />
<br />
By the way... DVD43 doesnt work on 64-bit Windows 7.<br />
<br />
Today, I finally got Blu-ray to play! Was it easy? Absolutely NOT.<br />
<br />
I'll tell you about it later.<br />
<br />
;-)Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-49541727355021480952010-03-07T22:13:00.001+11:002010-03-29T19:56:54.615+11:00Controlling the HTPC from another room so my wife doesnt get annoyed with meRather than run up and down the stairs with the box (there is nowhere safe to keep it upstairs from my marauding 4 year old son), I plugged in a wireless USB network card and controlled it remotely from the main computer upstairs.<br />
<br />
Used the free program called LogMeIn... works like a charm.<br />
<br />
Played its first DVD for a test - works well. I made sure it was region unencoded disk so that the player doesnt start locking to region 4. I need to research how to prevent Blu-ray disks locking the firmware on the player too.<br />
<br />
For DVDs, I always use DVD43 to prevent a DVD trying to encode the player's firmware. I don't know whether there is an equivalent for Blu-ray.<br />
<br />
I've been trying to think of better names for these two computers - something sort of like the Father PC being the old rebirthed 5x PC from upstairs and the HTPC the young, glamour puss.<br />
<br />
If you can think of something, make a comment and let me know.<br />
<br />
Just got to get a remote control and that TV tuner card. A keyboard and mouse can wait for the time being.<br />
<br />
Then I need to tackle to issue of getting it to go to sleep and wake up - these are software problems, that can be harder to deal with than hardware.Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-7565512014274145595.post-84726050582206469302010-03-07T17:20:00.000+11:002010-03-07T17:20:03.094+11:00We have liftoff!Yesterday was a big day for my project!<br />
<br />
I paid a visit to MSY in Auburn and bought the Blu-ray combo, 1T HDD and the tuner card - at the last moment I bought Windows 7 as well. In order to qualify for the OEM version of Windows 7, I needed four bits of hardware, and so got a cheap wireless network card as well.<br />
<br />
OEM Windows 7 Premium cost A$111, compared to a staggering $268 from Harris Technologies - although if forced to by at retail, I would have qualified for the upgrade at a mere A$181, as I've got a spare copy of Windows 98 lying around for just this purpose.<br />
<br />
Anyway... got home and the first challenge was to get the chintzy face off the Samsung Blu-ray:<br />
<br />
<div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEikjqZpW0kq4Bw_Mmy0_ByEcERFAzDdXX_ApSEbwJ3u-l_OjQELkFYUzg_BITyR4Gp2riYnTEX9NdU1vuRFu1mB1suAfP2YELDZPBcblbwDtGXTIKsCLmVuU5IqG2spu003-ZScOCpuGuME/s1600-h/images.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="88" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEikjqZpW0kq4Bw_Mmy0_ByEcERFAzDdXX_ApSEbwJ3u-l_OjQELkFYUzg_BITyR4Gp2riYnTEX9NdU1vuRFu1mB1suAfP2YELDZPBcblbwDtGXTIKsCLmVuU5IqG2spu003-ZScOCpuGuME/s200/images.jpg" width="200" /></a></div><div class="separator" style="clear: both; text-align: center;"><br />
</div><div class="separator" style="clear: both; text-align: left;">After gently probing with some jewellers screwdrivers, the face of the tray and the case came off and all was good.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">But it was pretty obvious that the little button on the Lian Li case wasn't long enough to reach the little button that activated the tray motor. This had me stumped for a bit.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Ended up getting a ordinary drawing pin like this:</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgHuS1PPf3WYX1x7R72eECviNkz2-IaEEcM7zj9oxScrYSwxikXKNeim3t1Qa11B1OmQ1gXUjxTL2eaEgTTmBfVWf-PJkcqKbHwBw2Ge4dbezZWwQ3bNBONHQdSNyTwJciksjXkRVSkcAwF/s1600-h/images.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgHuS1PPf3WYX1x7R72eECviNkz2-IaEEcM7zj9oxScrYSwxikXKNeim3t1Qa11B1OmQ1gXUjxTL2eaEgTTmBfVWf-PJkcqKbHwBw2Ge4dbezZWwQ3bNBONHQdSNyTwJciksjXkRVSkcAwF/s320/images.jpg" /></a></div><div class="separator" style="clear: both; text-align: center;"><br />
</div><div class="separator" style="clear: both; text-align: left;">and slicing the pin off and cutting a wedge shape into the thicker end with a Sonicrafter. Do you know what a Sonicrafter is? One of these:</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: center;"><br />
</div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhxfNceitczzj5-9PnfeNlyNYRtF23E4gv4HOoEAszrhRPxaFmTSCCaAw7VHuL-65uJQyU1HZe8XwSl_HgnAR6GT9birWl8Ik63wClA9J3lsNeXbIpjm4pAU9MqJYI-njdO8l2FxH74_Tjf/s1600-h/imagesCA4MW0TJ.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhxfNceitczzj5-9PnfeNlyNYRtF23E4gv4HOoEAszrhRPxaFmTSCCaAw7VHuL-65uJQyU1HZe8XwSl_HgnAR6GT9birWl8Ik63wClA9J3lsNeXbIpjm4pAU9MqJYI-njdO8l2FxH74_Tjf/s320/imagesCA4MW0TJ.jpg" /></a></div><div class="separator" style="clear: both; text-align: left;">The saw part vibrates back and forward very fast over a limited range of motion, and so cuts and grinds very precisely. Initiallly used a bit of Aquadhere to glue the pin over the existing button to test that the idea could work and get the position exactly right - when I was happy that it could work, I sealed the deal with super glue.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">The end result looks like below:</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><br />
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgydAboWkrCnek-7TmlwIDJOU6gwTJ_0jQ1D6kLdfTtHP4d-qgtgeG_V3-Hf7n8vx0ojEDV-bymIG2Duq9EOixtLdpsVXgyuGw1j08sUfAtU7agBZWgEy0gWBQBzYpz2J5_VXOpNUqj_icT/s1600-h/IMG_1194.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgydAboWkrCnek-7TmlwIDJOU6gwTJ_0jQ1D6kLdfTtHP4d-qgtgeG_V3-Hf7n8vx0ojEDV-bymIG2Duq9EOixtLdpsVXgyuGw1j08sUfAtU7agBZWgEy0gWBQBzYpz2J5_VXOpNUqj_icT/s320/IMG_1194.JPG" /></a></div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Doesnt look great from inside, but you can't see it at all from outside the case and the tactile feedback from the Blu-ray button is preserved fairly well. I think that the superglue should hold it forever.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">With that challenge defeated, I screwed in the HDD and Blu-ray into the brackets and positioned it carefully so that the facia that came with the case could be stuck onto the front of the tray. It was a bit fiddly, but got there in the end.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">I would have liked to mount the HDD over the other side of the case to better distribute heat, but I found what other builders of this case have discovered: the power cables provided don't reach over to the other drive bracket! No idea why Lian Li would have created such an obvious design flaw in their case... so anyway, the HDD is mounted directly under the Blu-ray.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Plugged in the power and all the lights on the HDD and Blu-ray spring to life. </div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div align="left" class="separator" style="clear: both; text-align: center;"><br />
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjnCeD9Z-0q0ZpeDxwIZ8a0Oy6nPVY-Fu1IHgjGmCdBq2hB8MuAIFlvn0Vg_at1JxKd9DNKMo1yiDggCmlC_VTne6VWV95nPDatLWCsLRR_5cYA5TQXit4bPU-RuMJTbp8wSEhnBG5X3IHE/s1600-h/IMG_1197.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjnCeD9Z-0q0ZpeDxwIZ8a0Oy6nPVY-Fu1IHgjGmCdBq2hB8MuAIFlvn0Vg_at1JxKd9DNKMo1yiDggCmlC_VTne6VWV95nPDatLWCsLRR_5cYA5TQXit4bPU-RuMJTbp8wSEhnBG5X3IHE/s320/IMG_1197.JPG" /></a></div><div align="left" class="separator" style="clear: both; text-align: center;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Things are getting crowded inside the case after I slide the power supply back into position (it slides back to enable access to the drive racks).</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Rearrange the wires as best I can and carry the case upstairs.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh32Ovmfzwv9fGuD5Ka046OWl-8enDrbNQ29OVu8qTlkB6DfP-zeoUeHpx_FdV08y53fx2OFys6W8qqH_XdXqneP6ltXwCQYQlYc0VVOVtqMeXSlST3Kbg122WkNfU-RDD3F8EK860M7mso/s1600-h/IMG_1199.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh32Ovmfzwv9fGuD5Ka046OWl-8enDrbNQ29OVu8qTlkB6DfP-zeoUeHpx_FdV08y53fx2OFys6W8qqH_XdXqneP6ltXwCQYQlYc0VVOVtqMeXSlST3Kbg122WkNfU-RDD3F8EK860M7mso/s320/IMG_1199.JPG" /></a></div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Break the seal on Windows 7 and put it in the Blu-ray and turn it on. The Blu-ray is by far the noisiest component in the whole assembly! with the cover on the case, it blocks down the sound a lot though.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Windows 7 loads flawlessly and away we go:</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiKpfM7u_lQvyjkKjfrUSFSW-fJR_TiyI8l_nIx68_nzo8yIcg7ycd4c8PVe1PF_utkaIUc0Z7BL8FXqlhyM63ACIv7ykRstKHrTeW9duMMvTqWf9rjKTXEb5clY7mLkc7zbgdbHJbaRwhi/s1600-h/IMG_1198.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiKpfM7u_lQvyjkKjfrUSFSW-fJR_TiyI8l_nIx68_nzo8yIcg7ycd4c8PVe1PF_utkaIUc0Z7BL8FXqlhyM63ACIv7ykRstKHrTeW9duMMvTqWf9rjKTXEb5clY7mLkc7zbgdbHJbaRwhi/s320/IMG_1198.JPG" /></a></div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Looks cool in the dark!</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhoxSylyhBHkEWBESq9Z-Gpe_Vzz6rAcIfkk9XOE6ge_JMqs1y-YTf8l0H-0Y_u9sOUH6-ztKsM88B0zzAvnbi7XTdvTBiMaX-QcvmFFf21IXEJQZw4s6xkd1hNNT_hyphenhyphenb0gp1lu3vKKB-Fe/s1600-h/IMG_1200.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" kt="true" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhoxSylyhBHkEWBESq9Z-Gpe_Vzz6rAcIfkk9XOE6ge_JMqs1y-YTf8l0H-0Y_u9sOUH6-ztKsM88B0zzAvnbi7XTdvTBiMaX-QcvmFFf21IXEJQZw4s6xkd1hNNT_hyphenhyphenb0gp1lu3vKKB-Fe/s320/IMG_1200.JPG" /></a></div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">About this time I realise that the tuner that I have is actually analogue only. Woops. I'm sure that somewhere I read that the model I got did digital. Oh well, I'm not too upset as it allowed me to qualify for the OEM Windows 7 and only cost $25. I'll flog it on ebay.</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">Here is the very first thing I've streamed from the internet - American "So you think you can Dance?"</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><object height="385" width="480"><param name="movie" value="http://www.youtube.com/v/5Z8WrpuKh58&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/5Z8WrpuKh58&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object></div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">I'm very pleased!</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;">I should have left well enough alone, because later on the mouse stopped working for some reason. Turned out that one of the pins was bent back and not engaging. I only discovered this after reinstalling Windows in a vain attempt to fix it and then, when giving up in frustration, noticed that the mouse didnt work on my primary PC either. I sort of feel relieved about that!</div><div class="separator" style="clear: both; text-align: left;"><br />
</div><div class="separator" style="clear: both; text-align: left;"><br />
</div>Unknownnoreply@blogger.com2